If there are a series of defects in the installation an […]
If there are a series of defects in the installation and use of Aluminum Corrugated Panel, there will inevitably be hidden dangers of water leakage, resulting in the loss of water resources, and aluminum corrugated panel manufacturers will also lead to the situation of untimely water supply. Moreover, if there is any trace of corrosion, it will also affect the overall condition of the aluminum corrugated panel. Therefore, during installation, an additional coating may be applied to the exterior or interior of the aluminum corrugated panel. However, the coating to be noticed should be selected according to the current environment. In addition, the coating needs to be uniform, otherwise, it will show abnormal changes due to the climate. Moreover, it is the selection of occasions. In some occasions, it is not suitable for the installation of aluminum corrugated panel, so it should be avoided as much as possible.
Perfect products are constantly maintained at a later stage. How to deal with the problem of accumulation and scratch of aluminum corrugated panel? The welding processes using flux include manual welding, arc welding with flux core and submerged arc welding. These welding processes will leave fine flux particles on the surface. According to the performance of aluminum corrugated panel, the general finishing method cannot remove it. This particle will be the corrosion source of crevice corrosion. It is necessary to use mechanical finishing method to remove these residual flux.
For the newly-produced aluminum corrugated panel products, the aluminum corrugated panel manufacturers may not be able to do post-processing and use in time because they cannot be sold in time. If they are piled up on the warehouse surface, they may fall into dust and be scratched, etc., then the appearance of the aluminum corrugated panel and even the physical properties of the alloy panel will be slightly changed. How to deal with these problems? According to different conditions, the analysis is focused on: welding spatter has a great relationship with welding process.