How To Install The Aluminum Honeycomb Panel

How to install the Aluminum Honeycomb Panel :

1. Lifting lug type, this installation method is the separation type of the lifting lug and the honeycomb panel. The lifting lug is connected to the glue seam position of the honeycomb panel after being processed separately. The suitable width of the glue seam is ≥12mm. This installation method makes the processing simple and the installation convenient.

2. Flanging type, this installation method is to process the flanging for installation when processing the aluminum honeycomb panel. The installation only needs to place the connection with the keel and the glue seam. The suitable glue seam width is ≥10mm. This method is easy to install. , but the processing is a little more complicated, and it is not suitable for modeling curtain wall panels.

3. Buckle type, this node is aluminum buckle type, the buckle is a specific profile, and the installation is simple, but this method has high requirements on the processing accuracy of the plate and is not recommended for plates with a length greater than 3000mm. According to the width of the buckle, there are 20mm and 40mm in the middle seam of the plate, etc.