Aluminum Honeycomb Panel Company Introduces The Skills Of Composite Board Processing

Aluminum Honeycomb Panel Company introduces the skills of composite board processing:

1. The influence between the hardness of the machining tool or the workpiece, if the quality of the workpiece, if the hardness of the tool is not enough, it will lead to the cutting tool and the cutting work, at this time excessive wear, we need to choose the cutting tool to transfer heat with high efficiency, To reduce the friction between the tool and the workpiece.

　　
2. The saw blade cutting plastic changes cause wear, we should choose a sharp blade and a wide chip breaker blade, cutting is to reduce the pressure, which can control the cutting well and achieve good results.

　　
3. In the cutting process, the blade inserts and the surface of the workpiece are easily worn out, which can easily cause uneven surfaces. During the cutting process, we try to choose the function of the wind. In the function selection, the wind can blow away a part of the chip to reduce dust adhesion. Surface, reduce friction.

4. Cutting tools and better points are mainly for processing. Stainless steel processing tools should be selected for the combination of toughness, toughness, and strength. The higher this may be, the better the effect will be.

5. During the processing of stainless steel, we should have good cutting conditions, choose suitable processing tools, and stainless steel processing can achieve our expectations. If there are problems in the processing process, we should slowly settle down and think about the results. In a hurry, Shenzhen Xinghao Stainless Steel Processing Factory will solve all the problems in the stainless steel processing process for you.