Aluminum Corrugated Panel Company Introduces The Use Of Stainless Steel Clad Panels

Aluminum Corrugated Panel Company introduces the use of stainless steel clad panels:

1. Adjust the height of the large chain of the cooling bed to ensure that the chain runs on the same level, and replace the damaged chain in time.

2. Standardize the use of steel plate hooks to avoid artificial scratches and rib injuries. At the same time, after the steel plate is pickled, plastic hooks are used to lift the steel plate.

3. When rolling medium plates with a thickness of more than 10mm, the splint should be opened quickly after the steel plate bites into the rolling mill to reduce the friction between the splint and the edge of the steel plate and avoid the pressing of the edge burrs.

4. Before producing the stainless medium plate, check whether the straightening roller is bonded with iron scales, and clean it in time.

5. In the steelmaking process, the rough grinding wheel is used to grind the surface of the billet, and then the fine grinding wheel is used to reduce the depth of the wear scar on the surface of the billet, so as to avoid the occurrence of wear scars on the surface of the steel plate after rolling.

6. Improve the material of the hearth roller, and replace the original heat-resistant alloy hearth roller with the asbestos roller of the car tube.

7. Select a higher temperature in the heating stage to ensure that the billet is burnt through, and use a lower heating temperature in the soaking stage. When overhauling the heating furnace, polish the oxidation bond of the slider on the sliding path of the heating furnace in time, and replace the damaged slider.