Performance Characteristics Of Flat Aluminum Solid Panel

The performance characteristics of Flat Aluminum Solid Panel :

1. Mechanical properties

①Impact resistance: The impact resistance of the PC endurance board is 250 times higher than that of traditional glass and 30 times higher than that of traditional glass. The impact strength of the PC endurance board is called a "transparent steel plate".

②Good tensile strength, good heat resistance of PC endurance board, even at 120℃, its tensile strength can still reach 350kgf/cm2.

③Bending strength: The PC endurance board has good bending resistance, even if the bending angle reaches 90°, it will not break.

④Fatigue resistance and creep resistance: The creep resistance of the PC endurance board is the same as that of thermoplastics. Even at high temperatures, its creep is still very small.

2. Thermal performance
①Melting temperature: The melting temperature of the PC endurance board is 135℃, and its continuous use temperature reaches 120℃. ②Coefficient of linear expansion: The coefficient of linear expansion of 7×10-5cm/cm/℃ is relatively small among plastics. ③ Embrittlement temperature: The embrittlement temperature of the PC endurance board is -40℃, and the continuous use temperature is -30℃, which is incomparable to general plastics.
⑤Combustibility: PC endurance board is one of the flame-retardants and self-extinguishing plastics, it will not produce toxic gas when heated at high temperature.
⑥ Thermal conductivity: The thermal conductivity of the PC endurance board is not much different from that of general plastics. It is 1/4 of glass, 1/300 of iron, 1/1000 of aluminum, and 1/2000 of copper. It is one of the materials with excellent thermal insulation properties. one.

3. Optical performance
①Transmittance: The transmittance of the PC endurance board is 85% or more, which is equivalent to that of glass.
②Weather resistance: general PC endurance board is exposed to the outdoors for a long time, and it is easy to cause yellowing and surface deterioration when exposed to ultraviolet rays. The surface of the PC endurance board is attached with an anti-UV layer, even if it is exposed outdoors for a long time, its optical and mechanical properties have no significant changes.